介绍一下轴承的公差符号, 方便大家在看样本时更好的理解数据.
d/ds公称内径/单一内径(Nominal bore diameter/Single bore
diameter)
dmp单一平面平均内径(Mean bore diameter;arithmetical mean
of the largest samallest single bore diamerers measured
in one radial plane)
△dmp单一平面平均内径偏差(dmp-d;Deviation of mean bore
diameter from the nominal dimension)
△ds单一内径偏差(ds-d;deviation of single bore diameter
from the nominal dimension)
Vdp单一径向平面内径变动量(Bore diameter
variation;difference between the largest & smallest
single bore diameters in one radial plane)
Vdmp平均内径变动量(dmp max-dmp min;Mean bore diameter
variation;difference between the largest & smallest mean
bore diameters)
D/Ds公称外径/单一外径(Nominal outside diameter/Single
outside diameter)
Dmp单一平面平均外径(Mean outside diameter;arithmetical
mean of the largest & smallest single outside diameters
in one radial plane)
△Dmp单一平面平均外径偏差(Dmp-D;Deviation of mean outside
diameter from nominal dimension)
△Ds单一外径偏差(Ds-D;Deviation of mean outside diameter
from nominal dimension)
VDp单一径向平面外径变动量(Outside diameter
variation;difference between the largest & smallest
single outside diameter in one radial plane)
VDmp平均外径变动量(Dmp max-Dmp min;Mean outside diameter
variation;difference between the largest & smallest mean
outside diameters)
Bs/Cs内圈/外圈单一宽度(Single inner ring/outer ring
width)
△Bs内圈单一宽度偏差(Bs-B; Deviation of a single inner
ring width from nominal dimension)
△Cs外圈单一宽度偏差(Cs-C; Deviation of a single outer
ring width from nominal dimension)
VBs内圈宽度变动量(Bs max-Bs-min; Variation of inner ring
widths; difference between the largest & smallest single
inner ring width)
VCs外圈宽度变动量(Cs max-Cs min; Variation of outer ring
widths; difference between the largest & smallest single
outer ring width)
B,C,T轴承公称宽度/高度(Nominal bearing width/height)
Ts轴承实际宽度/高度(Actual bearing width/height)
△Ts轴承实际宽度/高度偏差(Deviation of the actual bearing
width/height)
Kia成套轴承内圈径向跳动(Radial runout of assembled
bearing inner ring)
Kea成套轴承外圈径向跳动(Radial runout of assembled
bearing outer ring)
Sd内圈基准端面对内圈的跳动(Side face runout of inner ring
with reference to bore)
SD外表面母线对基准端面倾斜度变动量(Variation in
inclination of outside cylindrical surface to outer ring
side face)
Sia成套轴承内圈轴向跳动(Axial runout; assembled bearing
inner ring face runout with raceway)
Sea成套轴承外圈轴向跳动(Axial runout;assembled
bearing;outer ring face runout with raceway)
r公称倒角尺寸(Norminal chamfer dimension)
rs径向/轴向单一倒角尺寸(Radial/axial single chamfer
dimension)
rs min最小径向/轴向单一倒角尺寸(Smallest radial/axial
single chamfer dimension)
rs max最大径向/轴向单一倒角尺寸(Largest radial/axial
single chamfer dimension)
天津华鑫東洋轴承有限公司
地 址：南开区南门外大街世纪花园A-A-810室
电 话：
网 络 部：022-27260592
销售热线：022-27260590
022-27260591
022-27260593
经 理 室：022-27260597
传 真： 022-27260599
联 系 人： 张先生
网 址：http://www.skf-fag.com/
E--mail：skf-fag@skf-fag.com |
|
